Display Messages and Error Codes
Page 72 of 74
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Display Messages and Error Codes (continued)
Code
Message
Meaning
Location
Action
100
NO
DETECTOR
CONTROLLER
No detector
controller has
been detected at
power up
0
The system will
perform a system
reset as soon as
the start key is
pressed.
101
NO
TRANSPORT
CONTROLLER
No transport
controller has
been detected at
power up
0
The system will
perform a system
reset as soon as
the start key is
pressed.
107
INTERNAL
COMMAND
ERROR
The transport
controller has
received a ‘out
of sequence’
command
32
Note result message
received.
Press the Clear
key to retry the
operation. It is not
necessary to
remove all the
notes from the
pockets.
33
Start sort command
received.
34
Restart sort command
received.
35
Stop sort command
received.
36
Synchronize transport
command received.
37
Purge command
received.
38
Start transport
command received.
108
SYSTEM
PARAMETER
FAULT
The system
controller has
wrong or
missing
configuration
parameters
16
Invalid sort mode
selected.
The system will
attempt to
recover itself as
soon as the start
key is pressed.
17
No detector mask
information.
18
No note data.
109
SETUP
ERROR
Error during
system initial is
at ion
1
No feed sensor in
system.
The system will
perform a system
reset as soon as
the start key is
pressed.
Summary of Contents for Nvision
Page 2: ......