Talaris Nvision, User Manual

Page: 24 / 84

Process Selection Model: Nvision
Page 16 of 74 TP05613010 Rev. 02
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
4 Process Selection
4.1 Process Selection (Piece)
On power up, the machine defaults to the factory default or previously saved
settings.
If you wish to count other currencies or documents (which are not shown in the
currency selection), you will have to press the Piece key. You will now be able to
count any documents on the machine.
The machine will still have the double detection capability but will have no other
authentication in this process.
Press the Piece key and the display will say “SETTING”. Once this has finished
the display will now show the following screen:
The default batch setting for stacker pocket 1 is set to 100 notes.
You can change the batch quantity by pressing the Batch key on the control
panel. Then, by using the scroll key, you can select the LOWER POCKET LIMIT
or the UPPER POCKET LIMIT. Using the numerical key pad, enter the batch
quantity you require for that stacker pocket. Once a batch quantity has been
selected, press CLEAR (F3) or CANCEL (F4) or OK (F1) to return to the Piece
count display.
Note: BACK will only appear on the display is there is information to go back too.
Orient Piece Currency Denom Issue
Face Fitness Zero CDA BRF
Batch
Function Keys
COUNT ( Paper Pieces )
READY FOR NEW BATCH
BACK
COUNT ( Paper Pieces )
0
27
BACK