Talaris Nvision User Manual Download Page 5

Page: 5 / 84

Model: Nvision

TP05613010 Rev. 02

Page iii of vi

Declaration of conformity

Manufacturer and responsible person

Details Of Product:

Talaris Ltd.
Talaris House
Crockford Lane
Chineham Business Park
Basingstoke
Hampshire RG24 8QZ
England

Currency Counter

Telephone: +44 (0) 1256 368000
Fax:

+44 (0) 1256 368001

www.talaris.com

Model type:
Nvision

This product conforms to the essential requirements of:

Electromagnetic compatibility

Directive: 2004/108/EC
Standards: EN55022:1998
EN55024:1998

Low voltage electrical equipment (safety)

Directive: 2006/95/EC
Standard: EN60950-1:2006

David Brooks, Engineering Manager.

Authorised signatory on behalf of the responsible person.

This product range also meets the requirements of the European RoHS Directive

2002/95/EC and WEEE Directive 2002/96/EC.

Warning

This machine has been designed for optimum
safety for users. For your added protection
please follow these guidelines.

Voltages above 42V are potentially dangerous.

Always handle mains-supplied equipment with
caution. Never open the machine when it
plugged in. If the sensors are obscured the
feed rollers will operate. Always keep loose
clothing and hair out of the feed hopper area
when operating the machine.

Always connect the machine to an earthed
mains outlet socket, with the mains cable
supplied by Talaris or a direct equivalent.

Summary of Contents for Nvision




















































































Search results

Summary of Contents for Nvision

Reviews:

Related manuals for Nvision

Brands by name

Popular brands

Talaris Nvision, User Manual

Search results

Summary of Contents for Nvision

Reviews:

Related manuals for Nvision

Brands by name

Popular brands