Function Selection
Page 55 of 74
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
5.4.2.2
Using Smart Batch
This function operate in conjunction with the DENOM process (see ”4.3.1 Single
denomination value counting” on page 21.). Simply select the DENOM process to
activate Smart Batch. The machine will then batch to the size specified for that
denomination.
NOTE: The Nvision will always batch to the smallest batch size set, therefore the
normal batch size should always be equal to or greater then any Smart Batch
limit.
5.4.3
Manually Printing Batch Totals
If a printer is connected and enabled the last set of batch totals may be quickly
printed or reprinted by pressing the BATCH key for two seconds. This may be
used if a problem occurred during Auto Batch Printing or a duplicate batch receipt
is required. It may also be used if Auto batch printing is switched off
(see ”5.3.1.13 Auto-Print Batch” on page 48.), where receipts are only required
periodically.
Summary of Contents for Nvision
Page 2: ......
