Talaris 177-0600 User Manual Download Page 5

Page: 5 / 72

Model: EV8650

TP05413002 Rev. 03

Page iii of vi

Declaration of conformity

Manufacturer and responsible person

Details Of Product:

Talaris Ltd.
Talaris House
Crockford Lane
Chineham Business Park
Basingstoke
Hampshire RG24 8QZ
England

Currency Counter

Telephone: +44 (0) 1256 368000
Fax:

+44 (0) 1256 368001

www.talaris.com

Model type:
EV8626 and EV8650
Series Variants

This product conforms to the essential requirements of:

Electromagnetic compatibility

Directive 89/336/EEC
Amended by 92/31/EEC

Low voltage electrical equipment (safety)

Directive 73/23/EEC
Amended by 93/68/EEC

David Brooks, Engineering Manager.

Authorised signatory on behalf of the responsible person.

This product range also meets the requirements of the European RoHS Directive 2002/95/
EC and WEEE Directive 2002/96/EC.

Warning

This machine has been designed for
optimum safety for users. For your added
Protection please follow these guidelines.

Voltages above 42V are potentially
dangerous.

Always handle mains-supplied equipment
with caution. Never open the machine when
it plugged in. If the sensors are obscured the
feed rollers will operate. Always keep loose
clothing and hair out of the feed hopper area
when operating the machine.

Summary of Contents for 177-0600







































































Search results

Summary of Contents for 177-0600

Reviews:

Related manuals for 177-0600

Brands by name

Popular brands

Talaris 177-0600, User Manual

Search results

Summary of Contents for 177-0600

Reviews:

Related manuals for 177-0600

Brands by name

Popular brands