Supervisor Functions
Model: EV8650
Page 56 of 62
TP05413002 Rev. 03
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
4.2.13
rdiSP (Remote Display Settings)
Remote Display time out settings
Once in Supervisor Mode, use the Left and Right arrow keys to scroll through the
available Supervisor Functions.
Once
rdiSP SEL oFF
is displayed, press the START/STOP key to enter that function or
press the DENOM key to exit. Press DENOM again to exit Supervisor Function
completely.
The factory default is ‘0’ this means that the remote display will retain the last transaction
value until it has been either cleared by the user or a new transaction has been started.
The supervisor can set a time-out period on the display, so that after a preset period of
time the display will go blank.
The remote display time-out setting will be shown as:-
0 rdS
When the remote display time-out is disabled.
xx
rdS
When the remote display time-out is set to xx seconds.
Where xx can be set between 10 to 60 seconds
Use the numeric keypad to enter the time-out period you require.
Remote Display Error Display Function
The remote display can be set to show the
CF
and
dEn
error messages.
To activate this function, in the
rdiSP SEL
function press the MODE key, the display will
show
rdSEr off
, to turn error display on press the START/STOP key.
The screen will change to
rdSEr on
.
To return to the supervisor menu press the DENOM key
To exit the
rdiSP
option and the Supervisor Functions completely, press the DENOM
Key. You will be asked if you want to save the settings.
Press the DENOM key to exit without saving.
Press the START/STOP key to save settings.
1. Display
7. Speed
2. Total
8. Det
3. Mode
9. Clear
4. Batch
10. Right Arrow
5. Start / Stop
11. Denomination
6. Auto
12. Left Arrow
13. Numeric Keypad
1
2
5
6
7
3
8
4
9
12
10
11
13
