background image

Supervisor Functions

Model: EV8650

Page 44 of 62 

TP05413002 Rev. 03

Copyright © 2009 by Talaris Ltd., Basingstoke (UK)

4.2.5

Print SEL (Printer Set-up Mode)

For setting up the printer and printout configuration.

Once in Supervisor Mode, use the Left and Right arrow keys to scroll to the available 
Supervisor Functions.

Once 

Print SEL

 displayed, press the START/STOP key to enter that function or press 

the DENOM key to exit. Press DENOM to exit Supervisor Function completely.

Prtot oFF

 will be shown, Press the MODE key to first select the 

trn

 (Transaction 

number.) which shows the current transaction number level in the memory of the 
machine. Press the CLEAR key to reset then transaction number to zero.

Pressing the MODE Key again will display 

SEtuP Prn

. Once this is displayed press the 

START/STOP Key to scroll through the available printer set-up options.

Once that function is displayed, use the left and right arrow keys to alter the selected 
option. See the next page on how to change these settings.

Chr 1

Chr 2

Chr 3

 are special control characters at the end of the printout. These 

characters would be used if the printer had a guillotine fitted. The guillotine would then cut 
each printout separately. The Hex code characters for that type of printer (with a 

1. Display

7. Speed

2. Total

8. Det

3. Mode

9. Clear

4. Batch

10. Right Arrow

5. Start / Stop

11. Denomination

6. Auto

12. Left Arrow
13. Numeric Keypad

Option

Description

totAL

Print only counted (used) or all denomination totals. 

xxx

 = USE or ALL

HAnSH

Printer handshake level. 

xxx

 = OFF, Lo or hi.

CoLS

Number of printed columns.

 xxx

 = 25 or 40.

LinES

Number of trailing blank lines on printout. 

nnn

 = 0 - 20.

AutLF

Auto-line feed after each printed line. 

xxx

 = OFF or on.

Chr 1

Special control characters at end of printout. 

hh

 = 00 - FF in hex.

Chr 2

Special control characters at end of printout. 

hh

 = 00 - FF in hex

Chr 3

Special control characters at end of printout. 

hh

 = 00 - FF in hex

1

2

5

6

7

3

8

4

9

12

10

11

13

Summary of Contents for 177-0600









































































Reviews: