TALARIA POWER TECH (CHONGQING) CO., LTD.
XI. Maintenance Service
— 49 —
inside of your entire chain with a good coating of chain cleaner and let it sit for a few minutes.
3. Using a brush, fill the bristles with spray from the chain cleaner. Begin gently scrubbing the chain on the top of your
swingarm using the brush.
4. Do this for the entire length of the chain. Now do the same thing for the inside/bottom of the chain.
5. Using the brush, clean both sides of the rear sprocket. Let this soak for 5 minutes.
6.
Using a water hose, rinse the entire chain. Then, using a clean rag, wipe any residual moisture from the chain.
Drive Chain Lubrication.
WARNING!
Always wear safety goggle when lubricating the drive chain to prevent eye injuries.
WARNING!
Never have the motor spinning the wheel. Turn the wheel only by hand. Failure to do so could result in
serious injury.
WARNING!
Never place your hand between the chain and sprockets. Work with the chain only in the middle between
the two sprockets. Failure to do so could result in serious injury.
WARNING!
Do not allow any of the lubricant to get on the brake discs or brake pads. If the brake rotors or brake pads
are contaminated with lubricant, it will impair the motorcycle’s ability to stop. This could result in serious injury or death.
Follow the manufacturer's instructions for the chain cleaner you are using; below are the general guidelines. Do not
allow any of the lubricant to get on the brake pads.
To Lubricate The Drive Chain:
1. Turn the wheel backwards slowly and spray the lubricant on the inside of the chain inks.
2. Turn the wheel backwards slowly and spray the lubricant on the outside of the chain links.
3. Let the electric motorcycle stand for 30 minutes to allow the lubricant to penetrate the links rollers.
49
