TALARIA POWER TECH (CHONGQING) CO., LTD.
XI. Maintenance Service
— 46 —
CAUTION:
The fuse should be installed firmly. If it is loose, it may cause the fuse to heat up and results in other faults and hazards.
`Replace the fuse with those of the specified model and corresponding specification. If the fuse is out of specification, it
may not have the function of fuse protection.
If the new fuse is broken again in a short time, check for the causes other than the fuse.
Avoid strong impact to the fuse with water flow.
Inspection for brake oil level
Inspect the brake oil level for front and rear brake through the brake oil view lens.
If the brake oil level is low, then, need to open the brake oil container cap to add the
specified mineral oil for the disc brake.
Note: Before checking the brake oil level, the electric motorcycle should remain
upright.
1. Remove the two M3 screws from the brake oil container cover.
2. Add the specified mineral oilfor disc brake.
3. Check the sealing cover for any wears or damages, and make sure it’s in the
correct position.
CAUTION:
Do not spill the brake oil on the paint surface; otherwise, it may cause cracks on the surface of the paint parts.
Before removing the brake oil container cover, be sure to place a clean rag under the brake oil container.
At low brake oil level, there may be brake pad wear or leakage of hydraulic system. Check the brake pads for wear
The brake oil view lens
46
