TALARIA POWER TECH (CHONGQING) CO., LTD.
VIII. Charging and Battery Information
— 28 —
Circuit breaker closure
The circuit breaker is located in the battery
compartment,near the front of the battery
(IV) Install the Battery
1. Use the key to open the battery case cover.
2. Put in the battery from the top, pay attention to the front and rear direction of the battery (the charging port should
toward the left), and plug in the discharge plug. Then switch on the circuit breaker, close and lock the battery case
cover, and remove the key.
CAUTION:
The discharge plug must be plugged in place; otherwise, the electric motorcycle cannot correctly identify the battery,
which will result in failure to start.
Press down
Press down
The discharge plug is connected to the battery
The discharge plug is connected to the battery
28
