TALARIA POWER TECH (CHONGQING) CO., LTD.
VII. Starting and Operating
— 22 —
4. The kickstand is used for supporting the electric motorcycle only. Do not sit on the electric motorcycle with the
kickstand stretched out, or it may be damaged.
5. Do not park the electric motorcycle at a place where the ground is tilted or soft, or it may fall over.
6. The electric motorcycle contains a lot of electrical components. Please avoid long-time exposure to rain or using
high pressure washer to rinse the parts with electrical components.
Parking
1. Pay attention to your back and slow down to approach the parking site.
2. Use the brake to park the electric motorcycle, reset the throttle, turn OFF the Ignition Switch and remove the key
after the electric motorcycle stopped.
3. After parking, stretch out the kickstand to support the electric motorcycle. Make sure you have turn off the electric
motorcycle, and well lock the steering and battery case locks before leave and take the key with you.
Adjustment of shock absorber resistance
Adjust the shock absorber resistance according to
the instructions for front and rear shock absorbers in the accessory package.
Turn to dir to increase
the resistance (high)
Turn to dir to
increase the pressure (high)
Turn to direction - to decrease
the resistance (low)
Turn
to
direction
-
to
decrease the pressure (low)
22
