Takstar MX630, User Manual

Page: 39 / 56

1. USB stream mode:
Three options for USB stream mode: min delay, low delay, standard mode.
① Min delay: min delay of sound card input and output, monitor delay less than
10ms (depending on buffer). Please pay attention that this item has relatively
high demand on PC. It is recommended that you do not open large software and
handle other task when operating win7/win8 system to avoid noise in a sudden.
② Low delay: it is longer than min delay, monitor delay >20ms.
③ Standard mode: longer delay than low delay, monitor delay >30ms.
2. Sample rate:
Set the current sample ate. There are four options for the sample ate: 44100,
48000, 88200 and 96000. Set the sample rate according to different
Requirements.
No matter what sample rate you choose, the audio driver will convert the
Sample rate to 44.1k and output it to stereo mix. This ensures that the andwidth
used for transmission on the network is less and you have a smooth host
experience. Because it takes some time to make changes to the system, it is not
possible to record or play the video immediately after modifying the sample rate .
rIt is necessary to wait at least 5s, and judge whether the sample rate is switched
according to the current sample rate in the status bar of the control panel .
Note: due to the system limitations of Microsoft, when users want to make
configuration changes to WDM devices, they need to change the sample rate of
all WDM devices through the driven sample rate setting change. You can't
change the sample rate during playing and recording. Please change the sample
rate after you exit the playing software and host software, as shown in the
following figure:
38