Takstar MX630, User Manual

Page: 31 / 56

■ Function instruction
① Stereo Φ 6.35mm headset connector ① / ② ：
Used to connect with headset to output to headset, matching with ( Φ 6.35mm)
or ( Φ 3.5mm）headset.
② Mic/instrument connector ① / ② ：
Used to connect with mic or guitar or piano, etc. It can connect with XLR
connector or Φ 6.35mm (bal/unbal) to connect mic/guitar or other signal source
with one of the input connectors.
There are three types of input connector linkings: bal XLR, bal TRS, unbal TS.
Bal signal provides better noise rejection and is the best choice. Especially, the
cable is longer than 6m.When the connected equipment needs 48V phantom
power, please use bal XLR.
According to the standard, the wiring is as below, designated by AES:
Polarrity： ① ground , ② hot(+) , ③ cold ㈠
Front panel
30
① ②
③