Takstar MX630, User Manual

Page: 33 / 56

① INPUT 1 / 2 knob：
Adjusting the signal level of input connector 1 / 2 . Turn it counterclockwise to
decrease the input signal level and vice versa.
② 48V phantom power switch【1】/【2】：
Press it to turn on 48V phantom power. When it is turned on, The button LED
lights up blue. When it is turned off, the LED lights off. If the phantom power will
not be used, turn off the phantom power. When the phantom power is turned
on ,do not connect or disconnect any equipment. Set the volume to minimum
when turning on/off the switch to prevent from noise or equipment damage.
③ SIG LED：
Used to indicate SIG connector 【1】/【2】 input signal. When it detects there
is signal input, the green LED lights up. When no, SIG LED lights off.
④ CLIP LED：
Used to indicate MIC connector 【1】/【2】 input signal clip. When it detects
there is signal input clip, the LED lights up red. When no, CLIPLED lights off.
Master panel
32
⑩
①
②
③
④
⑤
⑥
⑦ ⑧
⑨