Maintenance and Care 7
TW9
63
7 Maintenance and Care
7.1 General notes
The good operating condition and life expectancy
of machines are largely influenced by care and
maintenance.
For this reason, it is in every machine owner’s
interest to perform the specified maintenance work
and comply with the service intervals. This chapter
deals in detail with periodic maintenance,
inspection and lubricating tasks.
The type-specific maintenance and inspection plan
lists all work to be performed on the machine at
regular intervals. Maintenance and inspection
plans for this purpose are contained in every
Instruction Book.
It is essential that the recommendations in
chapter 2 "Safety and Accident Prevention",
are observed.
7.2 Intervals
Initial inspection
Once
before
first putting into operation
Chapter 7.8.1
Daily tasks
Every 10 operating hours or every shift
1)
Chapter
7.8.2
Weekly tasks
Weekly or after 50 operating hours
1)
Chapter 7.8.2
100 operating hours
Once after first putting into operation
2)
Chapter
7.8.4
Every 500 operating hours
After every 500 operating hours or 6 months
Chapter 7.8.4
Every 1,000 operating hours
After every 1,000 operating hours or 12 months Chapter 7.8.4
Every 2,000 operating hours
After every 2,000 operating hours or after 2
years
Chapter 7.8.4
1)
The first date to arrive always applies
2)
also applicable if new or overhauled diesel engines are put into operation.
Summary of Contents for TW9
