Takeuchi TB175W, Operator'S Manual

Page: 58 / 221

56
CONTROLS
Switches
Working Light Switch
When this switch is turned while the starter
switch and parking light switch are at ON, the
lights turn on as follows:
O .........Off
I .........Work light, side lights and boom light
turn on.
Wiper Switch
IMPORTANT: If no washer fluid is
discharged, do not operate the washer.
Doing so may damage the pump.
IMPORTANT: Operating the wiper with no
moisture on the windshield will scratch the
glass. Apply water or washer fluid when
operating the wiper.
IMPORTANT: In cold seasons, the wiper
blade may freeze to the glass. Operating
the wiper forcibly may damage the wiper
motor.
O .............. Off
I .............. Wiper INT
II .............. Wiper
PUSH ....... Washer
L3B028
L3B0291
PUSH
Slew Speed Button
Pressing this button shifts rotation into
Slow speed, bringing its speed down to the
minimum. Slow speed is useful for performing
tasks that require precision handling even at
the cost of speed or efficiency.
Slow speed
The lamps on the button and instrument panel
will light up. Used for low speed slew.
The maximum set speed in slow speed can
be adjustable.
Upon shipment, it is set to 7.6 min
–1 (7.6 rpm).
Contact a Takeuchi sales or service outlet
for change.
Normal speed
The lamps will go out and slew will return to
its normal speed.
Supplement: As a safety precaution, the
machine is designed so that you cannot
switch to normal speed while slewing in slow
speed. You must instead bring the rotation
to a temporary halt and then press the slew
speed button to return to normal speed.
L3B027