2-1 Ins tallation
2 - 4
Leveling the tester
Try to level the tester with a water level as described below.
(NOTE)
As a water level is not standard accessory, be sure to bring it with you when the tester is
introduced to the user.
Operating steps:
(NOTE)
Pay attentions not to lift another level pad while working the operation below.
1.
Put a water level on the position (1) as indicated in the figure below.
2.
Adjust Adjuster bolts while checking that the tester stands on the floor in parallel within the
tolerance of 0.1mm/1000mm.
3.
Put a water level on the position (2).
4.
Adjust Adjuster bolts while checking that the tester stands on the floor in parallel within the
tolerance of 0.1mm/1000mm.
5.
Put a water level on the position (1), (2), and then check that the tester stands level with the floor
within the tolerance of 0.1mm/1000mm.
(2) Water level
(2) Water level
(1) Water level
(1) Water level
(2) Water level
(1) Water level
(1) Water level
