1-2 Names and function of parts
1
4
No.
Name
Function
Reference
)
Power SW
The product turns on and off.
'
Power ON lamp
The lamp lights in green color only when the
Power SW turns on.
!
Emergency stop SW
The product comes to a standstill on the spot and
never actuate until the SW is released.
"
Reset SW
After the Emergency stop SW was released
and/or the Safe cover was opened and closed,
the product returns to its original state by pressing
this SW.
#
Operation panel
The actuators connecting to the operation panel is
controllable.
-
Cover SW
The SW checks On/Off state of the safe cover.
$
Earth terminal
The operator can connect an earth band to
ground himself.
&
Tester terminal
Tester lead wires can connect to have versatile
measurements.
.
Personal computer
Mail controller to manage the whole product
Page 1-12
Personal computer &
Monitor
Page 2-10
Personal computer
(
Monitor
Displaying the system software
+
Mouse
Used for operating the system software
,
Keyboard
Used for operating the system software
Page 2-7
Operation stage
*
Clamp lever
The PC board set on the PCB holders is clamped
or released.
%
PC access window
The operator can access to the PC (Power SW,
CD drive, so on) directly.
/
Level pad
The product is leveled with an optional height.
Page 2-3
Level pad
0
Caster
Used for moving the product on a flat floor.
1
Fan
The heat inside the product is ventilated.
2
Slot for communication
cable
Used for drawing out a communication cable from
the Personal com puter.
3
Earth terminal
The product is earthed to ground.
4
AC IN (Power cable)
Used for applying AC primary voltage to the
product.
Page 2-14
Earth/Power supply
