1-2 Names and function of parts
1
8
PCB holder unit
Names and function of the PCB holder unit are explained below.
No.
Name
Function
Reference
)
Clamp lever
Used for clamping or releasing the PCB set on the
PCB holders.
'
Front PCB holder
!
Rear PCB holder
The PCB to test is set manually.
"
PCB width lock
Used for locking or releasing the Rear PCB holder.
#
Knob
for
adjusting
PCB width
Used for moving the rear PCB holder back and
forth.
-
Scale
$
Indicator needle
It indicates the width (cm) between the front and
the rear PCB holder.
&
Handle
Used for moving the rear PCB holder back and
forth directly.
.
Bottom probe
Probe accessible to the PC boards from the
bottom side. (x 2pcs)
(
Cable holder
Used for holding down the probe wire connecting
to the Bottom probe from.
+
Support pin
Used to leveling the PCB from the bottom side. (x
7pcs)
,
Machine ref. point
A mechanical origin where is to be the reference
points for each Probe.
'
Front PCB holder
)
Clamp lever
#
Knob for adjusting PCB width
,
Machine ref. point(F)
!
Rear PCB holder
.
Bottom probe
&
Handle
$
Indicator needle
-
Scale
(
Cable holder
+
Support pin
"
PCB width lock
