5
(3)
Warning Safety Labels Applied to System Case
Users are advised to avoid accidents by carefully reading the warnings and cautions contained on
warning stickers at key locations on the interior and exterior of the system.
Possible
Danger
Warning Type
Location of Danger
Type d’Avertissement
Localisation du Danger
Warning Label
Description of
Danger
Electric
shocks and
fires
Disassembly
Prohibited
System Interior
Démontage Interdit
Intérieur de l’Appareil
Never disassemble
system, as this may
lead to electrical
short-circuits,
leakage current
and/or fire.
Electric
shocks
Warning! High
Voltage
Power cable
Attention! Haute
tension
Cordon d’alimentation
The case and power
cable are subject to
high voltage levels,
so take care to avoid
electric shocks.
Burns
High Temperatures
Heat cover
& Heat block
Haute Température
Couvercle Chauffant
Avoid touching the
heat cover, which
reaches very high
temperatures and
may cause burns.
Please be sure to use 0.1mL-type for the reaction tube and the reaction plate used by this
equipment.
When 0.2mL type is inserted by mistake, it can't be taken any more out.
Please use consumables of Takara bio recommendation.
Caution
Note
Warning Label
Description
Lid does
not move
smoothly.
Reaction
abnormality
Using 0.1mL tubes
and 96wellplate
Do not use 0.2mL
volume type.
Please use 0.1mL type
for a reaction tube
and a
reaction plate with the cut
for left back corner. It is a
fear that catches on a lid
of equipment for
0.2mL-type.