8
５
６
７
８
９
10
Description of Buttons and Indications
‑ Press this button to start the operation of each mode.
While the equipment is in operation, the button functions
as the stop (interruption) button.
Operation Mode Selection Buttons and Lamps
Lamp
‑ A mode can be selected by pressing the appropriate button.
To customized the changed settings as the standard setting,
keep pressing the button chosen for one second or longer.
(See the section "Customized Settings" on page 16.)
Partial Heating Buttons and Lamps
‑ Partial heating is available by pressing the appropriate button.
(See the section "Partial Heating" on page 15.)
Lamp
Start/Stop Button and Lamp
Ring Rotation Button and Lamp
Mute Button and Lamp
Fan Button and Lamp
* Only for the specification with fan
Lamp
Lamp
Lamp
‑ Use the button to stop or rotate the ring at a desired position.
* Only for the manual mode
‑ Use this button to enable the buzzer sound to announce key
operations and process completion or to disable (mute) the
sound.
* Once the button is pressed, the state of the sound chosen
will be maintained until MUTE is pressed again.
Sound enabled: The MUTE lamp is off.
Sound disabled: The MUTE lamp is on.
* Even under the MUTE status, the error sound will not be turned off.
‑ Use this button to enable (ON) or disable (OFF) the air
blowing from the fan.
‑ The cooling operation will be continued for two minutes after
completing the COLOR, PERM, or TREATMENT modes.
In addition, air blowing from the fan is possible even during
the operation.
Lamp
