Tadano GR-700N, Service Manual

Page: 51 / 200

Y-5 Y-5
Adjusting Procedure (Electric)
38
WY04-2071E
1.8 Straight ahead detection switch (CN408)
1. Apply a thread locking agent (ThreeBond 1401 or
the equivalent) to the threaded section of the
switch beforehand.
2. Set the rear wheels so that they face straight
ahead.
3. Adjust the vertical position of the switch so that
the clearance A is 2.5 to 3 mm, and then fix by
using the nut. (Tire on-ground state)
• Nut tightening torque:
19 to 20 N-m {193 to 204 kgf-cm} (14 to 14.8 ft-lbf)
4. Check that the green LED lights up when the
switch is operated.
1.9 Rear steering lock pin IN detection switch
(CN417)
1.10 Rear steering lock pin OUT detection switch
(CN418)
Adjust the vertical position of the lock pin IN
detection switch and lock pin OUT detection
switch, and fix so that the dimension becomes as
described below.
• Switch fixing screw tightening torque
0.5 to 0.7 N-m {5 to 7 kgf-cm} (0.37 to 0.52 ft-lbf)
* Apply locking adhesive.
△
0
360-634-30000
△
1
347-224-33000
Mount so that the indicator lamp
(convex-shape notch) is directed
toward inside the vehicle.
When connecting the harness,
check that the base section
does not get bent forcibly.
Also, make sure to establish a
clearance with the cam. Convex-shape
notch
Vehicle inside
View B
Lock pin OUT
detection switch
Lock pin IN
detection switch
* Switch fixing screw
* Switch fixing screw
5.5 mm
(0.22 in)
5.5 mm
(0.22 in)
Lock pin IN detection switch
Lock pin OUT detection switch
Straight-ahead detection switch
View from vehicle rear (4th axle)