6
The wand will come with two spray tip options. The lower micron size atomizing spray tip will
already be installed on the wand. You will also get a higher micron fan nozzle as an option.
This additional nozzle option will be taped onto the wand when you receive the unit. The
installed atomizing nozzle is best for cleaning office areas, touch points, etc, as it does not
saturate things like paper and boxes that could be found in offices, retail, hospitality, restaurant,
educational type of environments. The attached additional fan nozzle spray tip is for application
in areas like warehouses, shipping carts, etc., where there is not a worry that the items being
sprayed could get oversaturated. This allows for a quicker application of the disinfectant to
cover larger areas. Care should be taken when applying disinfectant in food areas. Be sure to
read and follow the manufacturers instructions for disinfectant products.
WAN-PFMS
Replacing the Nozzle
5/4/2020
WAN-PFMS
PAGE 1
Remove the misting nozzle from
the wand by loosening
counterclockwise.
Screw the new nozzle on to the
wand clockwise until tight.
Wrap Teflon tape around the
threads on the new nozzle twice
as shown. Avoid getting Teflon
tape into the fluid path as it can
cause clogs.