background image

2

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Congratulations on your purchase of a Commercial Mister and Specialty Cleaner. You are now 
equipped to handle any and all commercial misting and carpet cleaning jobs. Your new unit is 
a high quality, precision-made product. All parts used in the manufacturing of this unit have 
passed rigid quality control standards prior to assembly. Please safeguard the original receipt 
/ invoice. If you experience any problems with your unit during the warranty period, the original 
receipt / invoice will act as proof of purchase. 

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS UNIT

Read and understand this owner’s manual and all labels on the unit before operating. Safety is a 
combination of common sense,staying alert and knowing how your unit works. Use this unit only 
as described in this manual. Use only manufacturer’s recommended attachments. To reduce the 
risk of personal injury or damage to your unit use only recommended accessories.

WARNING 

To avoid fire, DO NOT use with a flammable or combustible liquid or floor cleaner.

WARNING 

To avoid electric shock, DO NOT expose to rain. Store Indoors.

To reduce risk of fire, electric shock, or injury:
•  Do not use outdoors or on wet surfaces. 
•  Do not leave unit unattended when plugged in. Turn off the switch and unplug the electrical 

cord when not in use and before servicing. 

•  Do not allow to be used as a toy. Close attention is necessary when used near children.
•  Use only as described in this manual. Use only manufacturer’s recommended attachments. 
•  Do not use with damaged cord or plug. If unit is not working as it should, has been dropped, 

damaged, left outdoors, or dropped into water, return it to a service center before using.

•  Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull a cord 

around sharp edges or corners.  Do not run the unit over cord. Keep cord away from heated 
surfaces. 

•  Do not use extension cords or outlets with inadequate current carrying capacity. 
•  Turn off all controls before unplugging. 
•  Do not handle plug or unit with wet hands. 
•  Do not put any objects into openings.  Do not use with any opening blocked, keep free of 

dust, lint, hair, and anything that may reduce airflow. 

•  Keep hair, loose clothing, fingers, and all parts of body away from openings and moving 

parts. 

•  Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot 

ashes.

•  Use extra care when cleaning on stairs. Do not use to pick up flammable or combustible   

liquids such as gasoline, or use in areas where they may be present. 

•  Store your unit indoors in a cool, dry area. 
•  Do not unplug by pulling on cord. To unplug, grasp the plug, NOT THE CORD.
•  Follow these guidelines to ensure operator safety and to maintain equipment in running order.
•  Make sure the machine is plugged into an electrical outlet with the same voltage rating as 

shown on the nameplate of the machine.

•  Do not attempt to plug a 115 volt machine into a 230 volt outlet or a 230 volt machine into a 

115 outlet.

•  Replace a damaged cord immediately.
•  If an extension cord is necessary, use a three conductor grounding cord-12 gauge wire or 

heavier to prevent motor burnout and over-heating of wires

•  Do not expose the machine to freezing temperatures.

Summary of Contents for Powr-Flite NEBULA MISTER












Reviews: