background image

Troubleshooting:

PROBLEM: Days are flashing, pressing any key does noth-
ing except        key turns output On and OFF.
SOLUTION: 

Time of Day

and 

Day of Week

have not been

set. See 

“Setting the Time”

.

A second, but very unlikely cause of loss of program, is a
power failure with the backup capacitor low or dead. Check
by disconnecting power and monitoring how long the
capacitor keeps the time of day in the display. Typically, the
capacitor will maintain the time and programs for 4 days,
but not more than 5 days.

PROBLEM: Time of day was set while holding the       key
down, but days are still flashing.
SOLUTION: Current day of week was not set 

while holding

down the       key

. See 

“Setting the Time”

.

PROBLEM: It is 10 AM and an ON program for 8 AM was
entered, but the output is not ON. Display shows the
and       symbols.
SOLUTION: After programming, the timer does not “look
back” to determine if it should be ON. Press the         key
(temporary override) to turn the output ON;                appears
in display. The timer will assume automatic operation at the
next programmed event.

PROBLEM: A program for 8 AM Monday thru Friday was
entered, but it will not accept it and       is flashing.
SOLUTION: The ON       or OFF        was not entered as part
of the program. On or OFF 

must be selected

.

D

O IT

O

NCE

. D

O IT

R

IGHT

.

TACO, INC.

, 1160 Cranston Street, Cranston, RI 02920

Telephone: (401) 942-8000

FAX: (401) 942-2360.

TACO (Canada), Ltd.

, 6180 Ordan Drive, Mississauga, Ontario L5T 2B3.

Telephone: 905/564-9422.

FAX: 905/564-9436.

Visit our web site at: 

http://www.taco-hvac.com

Printed in USA

Copyright 2003

TACO, Inc.

Program ON/OFF

h

m

Day(s)

1

On

7 AM

00

Mon., Tue., Wed., Thurs., Fri.

2

Off

8 AM

00

Mon., Tue., Wed., Thurs., Fri.

3

On

8 AM

00

Saturday and Sunday

4

Off

9 AM

00

Saturday and Sunday

PNP Digital Timer Program Schedules (Example)

TIMER

BLACK

WHITE

YELLOW

NEUT. WHITE

YELLOW MOTOR LEAD

WHITE MOTOR LEAD

GND

SCREW

PUMP

LINE BLACK

WHITE

BLACK

AQUASTAT

5  4    3   2   1

TIMER

BLACK

WHITE

YELLOW

NEUT. WHITE

YELLOW MOTOR LEAD

WHITE MOTOR LEAD

GND

SCREW

PUMP

LINE BLACK

5   4    3   2   1

BLACK

WHITE

NEUT. WHITE MOTOR LEAD

YELLOW MOTOR LEAD

GND

SCREW

PUMP

LINE BLACK

AQUASTAT

THREADED PIPE

LOCKNUT

SPACER

RING

PUMP TERMINAL BOX

PUMP

TIMER MODULE BACK

Timer and Aquastat  Wiring Diagram

Timer Only Wiring Diagram

Aquastat Only Wiring Diagram

Timer Installation Diagram

(006 Circulator Shown)

Summary of Contents for 265

Page 1: ...ew and remove cover 3 Assemble the back portion of the Timer to the 00 ter minal box as shown in the Timer installation diagram 006 circulator pictured Make sure that the protruding tang on the back of the Timer box fits under the circu lator s terminal box base Adjust until the two terminal box openings are aligned 4 Secure the locknuts Feed the yellow and white circu lator lead wires into the Ti...

Page 2: ...ists of 1 An ON or OFF command 2 Time of day Hour and Minute 3 Single day or multiple days A program is required for each ON event and a program is required for each OFF event IMPORTANT BEFORE PRO CEEDING WITH SETTING THE TIME AND PROGRAMMING THE UNIT PRESS THE RESET KEY TO CLEAR ALL DATA FROM MEMORY Selecting AM PM or Military Time After pressing reset the display may show AM right The numbered d...

Page 3: ...cepted Day Key Selections Reviewing Programs To review the programs at any time press Prog key Programs will appear in the order they were entered with repeated presses of the Prog key After all programs have been reviewed the blank display will appear to allow enter ing another program Another press of the Prog key will display the number of free programs available such as Fr 16 if 4 programs hav...

Page 4: ...M A program for 8 AM Monday thru Friday was entered but it will not accept it and is flashing SOLUTION The ON or OFF was not entered as part of the program On or OFF must be selected DO IT ONCE DO IT RIGHT TACO INC 1160 Cranston Street Cranston RI 02920 Telephone 401 942 8000 FAX 401 942 2360 TACO Canada Ltd 6180 Ordan Drive Mississauga Ontario L5T 2B3 Telephone 905 564 9422 FAX 905 564 9436 Visit...

Reviews: