background image

 Indoor

 SunSmart

™ 

Wireless Timer System

INSTALLATION:
Wireless Battery Operated Timer
1.  On the back of the wireless timer, remove the plastic tab keeping the battery from making 

connection. You may need to remove the battery door if the tab doesn’t pull out easily.
A.  If the clock has not started, remove the batteries and reinstall them following the “+” and “–” 

polarities, ensuring they match the marked information within the battery housing.

B.  Replace the plastic battery door ensuring that it snaps back into place.

Plug-In Receiver Module
1.  Plug in the light or electronic device you wish the wireless timer to control into your 

receiver module.

2.  Plug the receiver module into your wall outlet.
3.  Make sure your light/device is turned to the On position. The lamp or device should not turn on. 

SETTING THE DATE AND TIME

NOTE: If no buttons are pushed for 30 seconds while in programming mode, the timer 

will default back to the clock screen. Push the Time button until you return to the step 

where the timer reset.

1.  Press RESET button on your wireless battery operated timer using a toothpick or a pencil 

and clear all settings. 

2.  Press the Time button once, and the year will be blinking. Press the Up or Down button to set the 

current year then press the Time button.

3.  The month will be blinking. Press the Up or Down button to set the current month then press 

the Time button.

4.  The day will be blinking. Press the Up or Down button to set the current day then press 

the Time button.

5.  Daylight Savings Time (DST) needs to be set next. DST with On blinking will be displayed. If your 

area observes DST, then press the Time button and move to the next step. If your area does not 
observe DST, then set it to Off by pressing the Up or Down button and press the Time button to 
continue to next step. 
NOTE: DST will automatically reset the times in the timer to match the current time change, if DST 
is set to On. The default DST time change is 2:00 am, the second Sunday of March, and then the 
first Sunday in November.

6.  Next step is to set the current time. The hour should be flashing, press the Up or Down button to 

select the current hour ensuring that AM/PM is correct then press the Time button.

7.  The minute should be flashing, press the Up or Down button to select the current minute then 

press the Time button. 

SETTING THE SUNSMART™ FEATURE

1.  NOR (North) will be flashing on your screen, press the Up or Down button to choose your location.  

A. NOR (North)
B. CEN (Central)
C. SOU (South)

2.  Press the Time Button once you have chosen your correct location.
3.  Your programmed sunrise time will now be on your screen with the time blinking. If the time is 

correct, press the Time button and continue to the next step (If the time is not correct, press 
the Up or Down button to fine tune the correct time the sun rises in your location then press 
the Time button).

4.  Your programmed sunset time will now be on your screen with the time blinking. If the time is 

correct, press the Time button and continue to the next step. (If the time is not correct, press 
the Up or Down button to fine tune the correct time the sun rises in your location then press 
the Time button).

5.  Your timer should now be returned to the clock screen showing the current time.

SETTING THE TIMER ON/OFF PROGRAMS

NOTE: If no buttons are pushed for 30 seconds while in programming mode, the timer 

will default back to the clock screen. Push the Program button until you return to the 

correct program you were setting, then press the Time button to return to the correct 

step where the timer reset (you can scroll through all 7 On/Off programs by pushing 

the Program button).

1.  Press the Program button to begin setting the times you wish your connected light or electronic 

device to turn On/Off. 

2.  “-- -- 1 ON” will be on the screen, press the Time button to program your first On program time.
3.  The day of the week will be flashing, press the Up or Down button to choose the days you wish 

this program to work. Your options are:
A.  Monday thru Sunday
B.  Each day individually
C.  Monday thru Friday
D.  Saturday & Sunday
E.  Monday, Wednesday & Friday
F.  Tuesday & Thursday

4.  Press the Time button once you have chosen the days of the week you want to control the device.
5.  The hour will now be blinking. You have three options to choose from:

A.  Sunset time: Press the Down button once to choose your pre-programmed sunset time or 

scroll untill the preset programmed time shows on the screen. If you choose to use the pre-
programmed sunset time, press the Time button and then press the Program button to move 
to 1 Off program and skip to step 6.

B.  Sunrise Time: Press the Down button a second time to choose your pre-programmed sunrise 

time or scroll untill the preset programmed time shows on the screen. If you choose to use the 
pre-programmed sunrise time, press the Time button and then press the Program button to 
move to 1 Off program and skip to step 6.

C.  Custom Time: Pressing the Down button a third time or scrolling with the Up button will let you 

manually select any hour and minute desired.
i.  If you chose to use a custom time, the hour will be blinking. Keep pressing the Down button 

to choose the hour you wish the timer to turn on (keeping in mind AM/PM). Press the Time 
button once you have selected your hour.

ii.  The minute will now be blinking, press the Up or Down button to choose the minute then 

press the Time button. 

iii.  Press the Program button again to program your first Off program time.

6.  The screen should read “-- -- 1 OFF”. Repeat the previous steps above for choosing your days of 

the week and program time.

7.  Repeat these steps for up to 7 different programs setting as many On/Off cycles as desired. At any 

time, push the On/Off button to complete programming and return to clock mode.

DELETING A PROGRAM

Press the Program button until you get to the program you would like to delete. Press the 
Mode/Resume button and the program setting will be deleted.

TIMER MODE OPTIONS

•  AUTO: Timer functions using all programs you have set.
•  RDM (Random): Timer uses all programs you have set +/- 30 minutes of On/Off times 

giving your home a more lived in look while away.

•  None (Manual mode): Timer does not use programs at all and is only on manual mode.

USING TIMER AS A REMOTE CONTROL
1.  Simply press the On/Off button to override timer programs to turn your lights or devices On/Off.
2.  If timer is in AUTO mode, it will follow the next timer program setting to turn your light or 

device On/Off.

3.  If the timer is in RDM (Random) mode, it will follow the next timer program setting to turn your 

light or device On/Off within an hour.

4.  If the timer is in Manual Mode (Blank on your screen not showing AUTO or RDM), then the light or 

device will stay On/Off until you change your timer mode option or you manually use the On/Off 
button again.

This device complies with part 15 of the FCC rules. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this 
device must accept any interference received, including interference that may cause 
undesired operation.

FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused 
by unauthorized modifications to this equipment. Such modifications could void the 
user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class 
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the equipment 
off and on, the user is encourage to try to correct the interference by one or more of 
the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

See www.jascoproducts.com for troubleshooting and frequently asked questions (FAQs).

NORTH

ALASKA

HAWAII

NORTH

CENTRAL

CENTRAL

SOUTH

SOUTH

RISK OF ELECTRIC SHOCK 
•  
DO NOT USE WITH AN EXTENSION CORD 
•  FULLY INSERT PLUG 
•  KEEP CHILDREN AWAY 
•  USE INDOORS ONLY 
•  DO NOT USE IN WET LOCATIONS 
•  UNPLUG BEFORE CLEANING

RISK OF FIRE 
•  DO NOT EXCEED ELECTRICAL RATINGS 
•  DO NOT USE TO CONTROL APPLIANCES  

 

  THAT CONTAIN HEATING ELEMENTS (COOKING  
  APPLIANCES, HEATERS, IRONS, ETC.)

WARNING

BATTERIES MAY LEAK HARMFUL LIQUIDS OR IGNITABLE 
MATERIALS OR EXPLODE CAUSING INJURY AND 
PRODUCT DAMAGE
• DO NOT MIX OLD AND NEW OR OTHER BATTERY TYPES
• REPLACE ALL BATTERIES AT THE SAME TIME
• REPLACE FULLY DISCHARGED BATTERIES IMMEDIATELY
• REMOVE BATTERIES IF PRODUCT IS TO BE UNUSED FOR   

 AN EXTENDED PERIOD OF TIME.

CAUTION

Up/Down
- Scroll through 

settings options

Time
- Press to set the date/time.
- Press to confirm choices 

when programming.

USE PENCIL OR TOOTHPICK TO RESET ALL SETTINGS.

Mode/Resume
- Toggle between Auto, Random 

(RDM), and Manual modes.

- In programming mode, deletes 

a set program.

Program
- Press to set/view 

programming.

DISPLAY SHOWN IN STANDARD “CLOCK” MODE.

On/Off
- Turns all wireless receivers 

within range On/Off

- Returns to Clock Mode when 

in programming mode.

Total ratings for both outlets:
125V 60 Hz:  

 

          15A General Purpose
          15A Resistive
          1000W Tungsten
          1/3HP
          500VA Electronic Ballast  
120VAC 60 Hz:
          8.3A Ballast 

MADE IN CHINA 
GE is a trademark of General Electric Company and is under 
license by Jasco Products Company LLC, 10 E. Memorial Rd., 
Oklahoma City, OK 73114.
This Jasco product comes with a 1-year limited warranty. 
Visit www.jascoproducts.com for  warranty details and 
product registration.
Questions? Contact us at 1-800-654-8483  between 
7:30AM—5:00PM CST.

AC POWERED RECEIVER OUTLET

BATTERY-OPERATED TRANSMITTER

26684 VERSION 01

12/04/14

GE5399R

Reviews: