Taarup 7640, Operator'S Manual

Page: 48 / 72

48
Operator´s manual round bale wrapper 7640
10.7 User functions screen displays
User function screens offer parameters that may be changed/configured by the operator.
The user functions can be activated when the Joystick function key is pressed in the Idle
mode. The screens that appear are listed in the next section. Stepping to the next screen can
be accomplished by operating the joystick. Moving the joystick to the right will step to the next
screen, stepping to the previous screen is done by moving the joystick to the left. When a
parameter has to be changed/edited, activate any of the four edit switches: clear (C switch),
plus (joystick up), minus (joystick down) or enter (‘=/OK’ switch).
Pressing the STOP key in any step of this mode will finish the editing/monitoring and return to
Idle mode screen.
10.7.1 User functions activated (1)
Shows that user function screens are activated.
10.7.2 Screen contrast (2)
Allows editing of the screen contrast, min. 35 %/max. 65 %.
During editing the screen contrast changes according to the
current value in the screen.
10.7.3 Bale counters (3)
First value shows current job counter, value can only be reset by
operating Info key. Second value shows the total counter of the
machine. This value can neither be reset nor edited by the opera-
tor.
10.7.4 Semi-auto configuration (4)
The semi-automatic configuration screen allows the operator to
change any of the semi-automatic steps in the complete wrapping
cycle. In the example screen above the loading of the bale is
configured to be confirmed with the =/OK switch, the start of the
wrapping cycle is configured to start automatically, while the
unloading of the bale is configured to be confirmed with the =/OK
switch.
0 = automatic progress
1 = progress by operating =/OK switch
2 = not included
3 = operate OK switch once for discharging and once more to re-
turn table to level position (discharge function only)
Operating model C