![Taarup 7640 Operator'S Manual Download Page 26](http://html2.mh-extra.com/html/taarup/7640/7640_operators-manual_3123120026.webp)
26
Operator´s manual round bale wrapper 7640
7
Wrapping
7.1 Loading film roll
Fit the roll of wrapping film in the
prestretcher. Note the direction of rotation.
Clean the rollers if necessary.
Attach the loose film end on the table. The
film tail will be released after the first rota-
tions and be wrapped.
7.2 Filmoverlap
The drive system is set up for constant 50%
overlap, i.e. when bale is covered all over,
two layers of film is applied.
Deviation might be caused by wear and tear
on the hydraulic components or wrong
setting on the table drive.
If a second prestretcher satellite is fitted,
make sure that roller drive gear ratio is
changed. Due to the second prestretcher
bale rotation speed should be doubled
7.3 No. of film layers
For grass, 6 layers of film are recom-
mended, laid according to the 2+2+2
method. 2+2 may be sufficient for short-term
storage in low temperature (e.g. wrapping
during the after-season).
70% prestretching of the film is the stand-
ard.
For long-term storage in areas with heavy
sunlight, 60% film prestretching is recom-
mended.
Wrapping
No. of wraps
750mm film width
Bale diameter
4 layers
6 layers
120cm 16
24
130cm 17
26
140cm 19
28
150cm 20
30
160cm 21
32
Total numbers of wraps required to com-
plete the sealing of the bale depend on bale
diameter, no. of layers and film width. Guid-
ing figures:
Summary of Contents for 7640
Page 2: ...2 Operator s manual round bale wrapper 7640...
Page 13: ...13...
Page 39: ...39 Operating model S...
Page 71: ...71 Notes 13 Notes...