Taarup 7640, Operator'S Manual

Page: 12 / 72

12
Operator´s manual round bale wrapper 7640
4.3 Liability and warranty
In order to ensure safety, all persons work-
ing at and/or with this machine must read
and understand this operation manual.
Furthermore this machine shall always be
used, handled and stored in accordance
with the design and construction (intended
use) which also means:
Exclusively work in accordance with the
instructions given in the appropriate Assem-
bly, Operation and Repair Instructions
(manuals) including all valid Errata and
Supplements as well as taking into account
the relevant Service Bulletins; exclusively
use correct tools and equipment being in a
perfect condition! Strictly observe the appli-
cable local regulations concerning safety
and accident prevention, generally acknowl-
edged and approved technical, medical and
traffic rules as well as the functional limita-
tions and safety instructions stated in above
mentioned technical documentation!
Electric/electronic equipment (e.g. control
panels, indicators, etc.) including their
accessories (e.g. cables, sensors, etc.) must
be handled, treated and stored in accord-
ance with the general accepted standard
rules for non-waterproof electric and elec-
tronic equipment (e.g. wireless sets), i.e.
among others:
clean and dry storage;
inaccessibility for rodents, martens, etc.
prevent exposure to rain and undampened
shocks!
Do not use any parts (spares, accessories,
lubricants) other then those complying with
manufacturer requirements. A part complies
with those requirements when either genu-
ine or approved by the manufacturer or
when all its properties can be proven to
meet with the appropriate requirements for
that very use/ function!
Only well instructed people being familiar
with all possible danger shall work with or at
the machine!
The machine shall not be used nor trans-
ported unless all safety devices (covers,
plates, rails, curtains, locks, etc.) are cor-
rectly installed and in a perfect condition
and set in the appropriate safety position!
All safety decals and signs shall be legible
and in the correct place!
Unauthorized modification of or arbitrary
changes on the machine or parts of it ex-
clude any responsibility and reliability of the
manufacturer for the consequences of that
operation!
Attention:
Those disregarding above mentioned rules
act grossly negligent (careless) through
which all manufacturer warranty and reliabil-
ity for damages and all other consequences
become extinct! The negligent person
carries all risks!
4.4 Lifting the machine with crane
Only use approved lifting device. The weight
of the machine is given in «Technical speci-
fications».
Be careful! Make sure that nobody stands
under or near the machine when it is being
lifted.
Use a guide wire to keep machine in posi-
tion.
Safety