Take your engine and temporarily bolt it to the firewall using a bolt, a stand-off and a washer
supplied in the hardware pack. Use another stand-off to support the opposite corner of the engine's
back plate. Remove the cowl bolts from the front of the fuselage and offer up the lower half of the
cowl to check the how well it is centred.
Make adjustments to the hole that you have drilled and check the fit again. Once satisfied with the
fit, put the top half of the canopy on and recheck using the spinner as a reference. Ideally you want
equal spacing around the whole circumference of the spinner back plate. Also check the clearance
between the back plate and the front of the cowl. Adjust with washers behind the stand-off as
necessary.
16
Summary of Contents for TS 120CC Slick
Page 1: ...Instruction Manual for TS 120CC Slick Edge Extra...
Page 5: ...3...
