Locate one of the servo hole ‘doublers’ from the accessory box, and glue it on the inside of the
motor box to help with the throttle servo screw support.
Drill a hole through the firewall for your carburettor feed line from the fuel tank, and run the tube
through it.
Now also install your headers and canisters (if you are using them).
Select the canister support from the accessories box that best meets your requirements. Use the
included silicone tube segments to support the canisters in the mount.
There are fixing points with captive nuts within the canister tunnel, use M3 bolts and washers with
blue threadlok to secure them. (The one shown is just in front of the under carriage mounting
block).
18
Summary of Contents for TS 120CC Slick
Page 1: ...Instruction Manual for TS 120CC Slick Edge Extra...
Page 5: ...3...
