T.I.P. SWEEP-N-CLEAN SW-48-A, Operator Instructions Manual

Page: 15 / 33

SW48-M
14
The Brush Height Adjustment Arm has a scale that indicates brush position on both sides (Fig.
3). Make sure this setting is the same on both sides.
Fig. 3
When sweeping operation is complete, be sure to store brushes in the "Up" position, and not in
contact with the ground.
ENGINE/DRIVE TRAIN
The engine should be checked for proper lubrication levels before first use according to the
engine manufacturer's Owner's Manual.
Fill fuel tank with regular unleaded gasoline.
CAUTION!
Do not expose gasoline to sparks or open flames. Do not smoke when filing gasoline tank on
engine. Explosion or fire may result.
Remove the side shield and check v-belt for proper tension. When pressed in the center of the
belt, there should be ½ to 1" of travel. If the belt needs to be tightened, turn the adjusting nut on
the tensioning spring to add more tension. Repeat the procedure if necessary. After the tension
is adjusted correctly, reinstall the safety shield, making sure that the electrical wires are
positioned in a way as to not get damaged by the shield.