SW48-M
8
SAFETY
SW48-M SWEEP-N-CLEAN
UNDERSTAND AND FOLLOW SAFETY INFORMATION
ALL OPERATORS should read and understand all safety information and operating instructions
for the Sweep-N-Clean, and learn how to use the controls properly. DO NOT let anyone operate
without proper instruction. NEVER use the Sweep-N-Clean for any purpose other than what it is
designed for.
SAFETY LABELS
Make sure that ALL OPERATORS can recognize and understand all safety-warning labels on
the machine. Keep all safety labels in good condition, and replace those that are missing or
damaged. Replacement safety labels are available from your dealer.
Your equipment shows the following pictograms.
LEARN ABOUT THESE PICTOGRAMS AND WHAT THEY STAND FOR.
1.
CAUTION! Read the Sweep-N-Clean operator's manual thoroughly, so you
know
precisely what all the settings and switches are used for before you start using the
machine.
2.
CAUTION! Before performing maintenance:
Read the operator's manual.
Make sure both Sweep-N-Clean's engine and tow vehicle are both turned off
with
keys removed.
Be sure electric clutch switch is turned off.
Place a sign, "Maintenance-Out Of Order" on the switch box.
Prevent dangerous situations that may arise if one of the machine's parts starts working suddenly.
3.
CAUTION! Danger of serious injury through pinching between the rotating
brush
and the machine frame.
Never attempt to clean the brush while it is rotating.
Never enter near the running brush.
All personnel should remain at least 15 feet away from working machine at all times.
Consult Operator's Manual.
Always support the machine properly before working underneath.
Turn off tow vehicle and remove the starter key.
Summary of Contents for SWEEP-N-CLEAN SW-48-A
Page 1: ......
Page 24: ...SW48 M 23 WIRING DIAGRAM 1 SW48 M Sweep N Clean...
Page 27: ...SW48 M 26 DECAL PLACEMENT SW48 M SWEEP N CLEAN...
