Product Name: MOBILMET 763
Revision Date: 05Sep2007
Page 5 of 9
______________________________________________________________________________________________________________________
Relative Density (at 15 C ):
0.87
Flash Point [Method]:
>160C (320F) [ ASTM D-92]
Flammable Limits (Approximate volume % in air):
LEL: 0.9 UEL: 7.0
Autoignition Temperature:
N/D
Boiling Point / Range:
> 316C (600F)
Vapor Density (Air = 1):
> 2 at 101 kPa
Vapor Pressure:
< 0.013 kPa (0.1 mm Hg) at 20 C
Evaporation Rate (n-butyl acetate = 1):
N/D
pH:
N/A
Log Pow (n-Octanol/Water Partition Coefficient):
N/D
Solubility in Water:
Negligible
Viscosity:
18 cSt (18 mm2/sec ) at 40 C | 4.2 cSt (4.2 mm2/sec) at 100C
Oxidizing Properties:
See Sections 3, 15, 16.
OTHER INFORMATION
Freezing Point:
N/D
Melting Point:
N/A
Pour Point:
-18°C (0°F)
DMSO Extract (mineral oil only), IP-346:
< 3 %wt
SECTION 10
STABILITY AND REACTIVITY
STABILITY:
Material is stable under normal conditions.
CONDITIONS TO AVOID:
Excessive heat. High energy sources of ignition.
MATERIALS TO AVOID:
Strong oxidizers
HAZARDOUS DECOMPOSITION PRODUCTS:
Material does not decompose at ambient temperatures.
HAZARDOUS POLYMERIZATION:
Will not occur.
SECTION 11
TOXICOLOGICAL INFORMATION
ACUTE TOXICITY
Route of Exposure
Conclusion / Remarks
Inhalation
Toxicity (Rat): LC50 > 5000 mg/m3
Minimally Toxic. Based on test data for structurally similar
materials.
Irritation: No end point data.
Negligible hazard at ambient/normal handling temperatures.
Based on assessment of the components.
Ingestion
Toxicity (Rat): LD50 > 2000 mg/kg
Minimally Toxic. Based on test data for structurally similar
materials.
Skin
Toxicity (Rabbit): LD50 > 2000 mg/kg
Minimally Toxic. Based on test data for structurally similar
materials.
Irritation (Rabbit): Data available.
Negligible irritation to skin at ambient temperatures. Based on test
data for structurally similar materials.
Eye
