SystemBase Eddy-CPU, User Manual

Page: 26 / 55

Eddy-CPU User Guide
26
In case you configure Eddy to use DHCP to obtain an IP address automatically, you might find it hard to
know the IP address to connect to. To provide users with an easier way to know the current IP address,
Eddy has a fixed alias IP that is always accessible. Use the address below whenever you cannot find out
Eddy’s IP address.
Factory default alias IP address: 10.10.1.1
In order to connect with this address, you need to change network configurations so that your PC can
connect to the IP 10.10.1.1. Please refer to an example below, and note that values don’t necessarily have
to be identical to the example below.
Now you are ready to connect to Eddy! There are three options to configure Eddy.
Web : You can easily configure Eddy with web interface, accessible from any web browser. For more
information, please refer to Chapter 5. Configuration via Web.
Telnet : You can configure Eddy with commands after accessing Eddy through Telnet. For more