Eddy-CPU User Guide
45
z
set mask <Subnet mask>
(Default: 255.255.255.0)
Set the subnet mask Eddy is assigned to.
When line type is Static IP, manually enter an appropriate subnet mask.
When line type is DHCP, it is not editable.
z
set gateway <Gateway address>
(Default:
192.168.0.1)
Set the default gateway Eddy is assigned to.
When line type is DHCP, it is not editable.
z
set snmp [Enable / Disable]
(Default: Disable)
Enable or disable SNMP(Simple Network Management Protocol) support.
MIB-II (RFC 1213):
System, Interface, IP, ICMP, TCP, UDP
MIB-I (RFC 1317):
Serial Interface
NMS Configuration
If multiple devices are installed and managed together, integration in management is necessary. In
addition, it is often the case when the device reports an erroneous status, figuring out the reason for the
failure becomes a time-consuming job. To solve this inefficiency and provide better solution, Eddy
includes a Network Management System software, Portview.
z
set nms <IP address>
(Default: 0.0.0.0)
If IP is set to 0.0.0.0, NMS feature is disabled.
z
set nport <Port number>
(Default: 4000)
NMS socket number (if NMS is used)
z
set name
(Default: Eddy-1/Pin)
Set the device name for management. 32 Characters at maximum.
z
set group
(Default:
None)
Set the group name for management. 32 Characters at maximum.
z
set location
(Default: None)
Set the location name for management. 32 Characters at maximum.
Summary of Contents for Eddy-CPU
