Eddy-CPU User Guide
43
Chapter 6.
Configuration via Telnet
1.
Connection
Open your telnet client and enter Eddy’s IP address to connect. You need to enter appropriate username
and password to login. Please note that this username and password is used as authentication method for
Web as well. This means if username or/and password has been modified from the telnet interface,
modified values have to be entered to connect to web, and vice versa.
Factory default username:
eddy
Factory default password:
99999999
With ‘
set
’ commands, you can configure Eddy’s settings.
With ‘
view
’ commands, you can view current Eddy’s settings.
After changing values, you can see modified values with ‘view’ commands. But be careful because these
values are not in effect unless you issue a ‘
set save
’ command. Changes will be discarded if you do not
save current settings.
Command notations:
1)
set line [ ip / dhcp ]: Either enter
set line ip
or
set line dhcp
.
2)
set ip <IP address>: Enter actual values such as
set ip 192.168.0.223
Summary of Contents for Eddy-CPU
