SystemBase Eddy-CPU, User Manual

Page: 52 / 55

Eddy-CPU User Guide
52
3. Now connect to Eddy with Telnet.
4. Enter your username and password.
5. After receiving a prompt, issue a command
‘ tftp –g –l firmware –r Eddy_GN_10a.bin 192.168.0.45 ’ where –l firmware refers to the local
firmware location (Eddy) and –r Eddy_GN_10a.bin refers to the firmware filename that is in
TFTP Root directory at TFTP server (PC). The last argument is the TFTP server’s IP address
(PC).
6. You get no output if TFTP transmission is successful.
7. Move to the directory where the firmware is downloaded, and issue a command ‘ ls ’ to make
sure uploaded firmware file resides in this directory.
8. Issue a command ‘upfirm firmware’ to start writing a new firmware to the memory.
9. Check if Erase / Write / Verify process is successful.
10. Issue a command ‘ reboot ’ to reset Eddy with a new firmware.