SystemBase Eddy-CPU, User Manual

Page: 51 / 55

Eddy-CPU User Guide
51
10. Now connect to Eddy with Telnet, if you are not connected.
11. Issue a command ‘cd /var/home/eddy’ to move to the upload directory.
12. Issue a command ‘ ls ’ to make sure firmware files are both successfully uploaded.
13. Issue a command ‘ fcp -v Eddy_KR_10c.bin /dev/mtd2 ’ to write the new kernel image to the
Flash memory of Eddy.
14. Issue a command ‘ fcp -v Eddy_FS_10c.bin /dev/mtd3 ’ to write the new file system image to
the Flash memory of Eddy.
15. Check if Erase / Write / Verify process is successful.
16. Issue a command ‘ exit to close the telnet window, and reset Eddy to start with new firmware.
Update via TFTP
1. You need a TFTP server on your PC. There are various freeware, so install any TFTP server
software of your choice.
2. Make sure the firmware file is included in the current directory.