manualshive.com logo in svg

Synway SMG1008, User Manual, Page: 48 / 54

Share
Download
Synway SMG1008 User Manual Download Page 48

                                                           

Synway Information Engineering Co., Ltd

 

3.8.9 SNMP Config 

 

Figure 3-49 SNMP Configuration Interface 

See Figure 3-49 for the SNMP configuration interface. If the SNMP feature is enabled, once the 
gateway receives a request from the SNMP management software, it will collect relevant 
information and reply them to the SNMP management software. By default, the SNMP feature is 
disabled. The available information includes kernel version, CPU usage, processes, memory 
usage, startup information, LAN status and etc. Currently, the gateway only provides the 
community string for information acquisition. The table below explains the configuration items 
shown in Figure 3-49. 

Item 

Description 

SNMP Server 

Address 

IP address of SNMP. 

Monitoring Port for SNMP on the gateway. 

Monitoring Port 

Read-only 

Community String 

Community string used for information acquisition. 

SMG Series Analog Gateway User Manual (Version 1.0)           

                                     Page 43 

Summary of Contents for SMG1008























































Reviews:

No comments