Synway Information Engineering Co., Ltd
Source Port Group
(Call Initiator)
Port group from which the call is initiated.
CallerID Prefix,
CalleeID Prefix
A string of numbers at the beginning of the caller/called party number. This item can
be set to a specific string or “*” which indicates any string. These two configuration
items together with
Call Initiator
can specify the calls which apply to the number
manipulation rule.
Stripped Digits from
Left
The amount of digits to be deleted from the left end of the number. If the value of
this item exceeds the length of the current number, the whole number will be
deleted.
Stripped Digits from
Right
The amount of digits to be deleted from the right end of the number. If the value of
this item exceeds the length of the current number, the whole number will be
deleted.
Reserved Digits
from Right
The amount of digits to be reserved from the right end of the number. Only when the
value of this item is less than the length of the current number will some digits be
deleted from left; otherwise, the number will not be manipulated.
Designated information to be added to the left end of the current number.
Prefix to Add
Designated information to be added to the right end of the current number.
Suffix to Add
Note: The number manipulation is performed in 5 steps by the order of the following
configuration items: Stripped Digits from Left, Stripped Digits from Right, Reserved Digits
from Right, Prefix to Add and Suffix to Add.
After configuration, click
Save
to save the settings into the gateway or click
Close
to cancel the
settings.
Click
Modify
in Figure 3-36 to modify a number manipulation rule. See Figure 3-38 for the Tel
Æ
IP
CallerID manipulation rule modification interface. The configuration items on this interface are the
same as those on the
Add Tel
Æ
IP CallerID Manipulation Rule
interface. Note that the item
Index
cannot be modified.
SMG Series Analog Gateway User Manual (Version 1.0)
Page 36