Synway Information Engineering Co., Ltd
SIP Account
When the port group initiates a call to SIP, this item corresponds to the username of
SIP; when the port group initiates a call to PSTN, this item corresponds to the
displayed callerID.
Password
Registration password of the port group. To register the port group to the SIP server,
both configuration items
SIP Account
and
Password
should be filled in.
Register Mode
Sets the way for SIP to make outgoing calls (TEL
Æ
IP) on the gateway.
Option Description
Do Not Register
SIP initiates a call in a point-to-point mode.
Register Gateway
SIP initiates a call with the registered SIP account and
password of the whole gateway. (Refer to
3.3.1 SIP
Settings
for gateway registration.)
Register Port Group
SIP initiates a call with the registered SIP account and
password of the port group.
SIP initiates a call with the registered SIP account and
password of the port.
Register Port
Register Status
Registration status of the port group. When
Register Port Group
is set to
No
, the
value of this item is
Unregistered
; when
Register Port Group
is set to
Yes
, the
value of this item may be
Failed
or
Registered
.
Port Select Mode
When the port group receives a call, it will choose a port based on the select mode
set by this configuration item to ring or to connect. The optional values and their
corresponding meanings are described in the table below.
Option Description
Increase
Search for an idle port in the ascending order of the port
number, starting from the minimum. If no match is found,
search repeatedly until finding a port which is allowed to
enter the call waiting state.
Decrease
Search for an idle port in the descending order of the port
number, starting from the maximum. If no match is found,
search repeatedly until finding a port which is allowed to
enter the call waiting state.
Cyclic Increase
Provided Port N is the available port found last time.
Search for an idle port in the ascending order of the port
number, starting from Port N+1. If no match is found,
search repeatedly until finding a port which is allowed to
enter the call waiting state.
Provided Port N is the available port found last time.
Search for an idle port in the descending order of the port
number, starting from Port N-1. If no match is found,
search repeatedly until finding a port which is allowed to
enter the call waiting state.
Cyclic Decrease
SMG Series Analog Gateway User Manual (Version 1.0)
Page 26