Synway Information Engineering Co., Ltd
Item
Description
Index
The unique index of each routing rule, which denotes its priority. A routing rule with
a smaller index value has a higher priority. If a call matches several routing rules, it
will be processed according to the one with the highest priority.
Description
More information about each routing rule.
Source IP
IP address from where the call is initiated. This item can be set to a specific IP
address or “*” which indicates any IP address
A string of numbers at the beginning of the caller/called party number. This item can
be set to a specific string or “*” which indicates any string. These two configuration
items together with
Source IP
can specify the calls which apply to a routing rule.
CallerID Prefix,
CalleeID Prefix
Port group to which the call will be routed.
Call Destination
After configuration, click
Save
to save the settings into the gateway or click
Close
to cancel the
settings.
Click
Modify
in Figure 3-25 to modify a routing rule. See Figure 3-27 for the IP
Æ
Tel routing rule
modification interface. The configuration items on this interface are the same as those on the
Add
New Routing Rule (IP
Æ
Tel)
interface. Note that the item
Index
cannot be modified.
Figure 3-27 Modify Routing Rule (IP
Æ
Tel)
To delete a routing rule, check the checkbox before the corresponding index in Figure 3-25 and
click the
Delete
button.
Check All
means to select all available items on the current page;
Uncheck All
means to cancel all selections on the current page;
Inverse
means to uncheck the
selected items and check the unselected. To clear all routing rules at a time, click the
Clear All
button in Figure 3-25.
SMG Series Analog Gateway User Manual (Version 1.0)
Page 29