manualshive.com logo in svg

Synway SMG1008, User Manual, Page: 47 / 54

Share
Download
Synway SMG1008 User Manual Download Page 47

                                                           

Synway Information Engineering Co., Ltd

 

3.8.6 Backup & Upload 

 

Figure 3-46 Backup & Upload Interface 

See Figure 3-46 for the backup and upload interface. To back up the configuration file to your PC, 
just click 

Backup

. To upload a configuration file, select it via 

Browse

…

 and click 

Upload

. The 

gateway will automatically apply the uploaded data to overwrite the current configurations. 

3.8.7 Factory Reset 

 

Figure 3-47 Factory Reset Interface 

See  Figure 3-47 for the factory reset interface. Click 

Reset

 to restore all configurations on the 

gateway to factory settings. 

3.8.8 Restart 

 

Figure 3-48 Service/System Restart Interface 

See Figure 3-48 for the restart interface. Click 

Restart

 under the service restart interface to restart 

the gateway service or click 

Restart

 under the system restart interface to restart the whole 

gateway system. 

SMG Series Analog Gateway User Manual (Version 1.0)           

                                     Page 42 

Summary of Contents for SMG1008























































Reviews:

No comments