manualshive.com logo in svg

Synway SMG1008, User Manual, Page: 45 / 54

Share
Download
Synway SMG1008 User Manual Download Page 45

                                                           

Synway Information Engineering Co., Ltd

 

3.8.2 Time 

 

Figure 3-42 Time Settings Interface 

See Figure 3-42 for the time settings interface where you can modify the system time manually or 
enable the NTP time synchronization feature. To set the time manually, check the checkbox for 

System Time

 and then modify the time in the edit box behind. To synchronize the system time 

with the NTP server, check the checkbox for 

NTP

 and configure the items 

NTP Server Address

, 

Synchronizing Cycle

 and 

Time Zone

. By default, 

NTP

 is disabled. 

Daily Restart

 means to restart the gateway regularly every day at the preset 

Restart Time

. By 

default, this feature is disabled. 

After configuration, click 

Save

 to save the above settings into the gateway or click 

Reset

 to 

restore the configurations. The time settings will not go into effect until you save them into the 
gateway. 

3.8.3 Upgrade 

 

Figure 3-43 Upgrade Interface 

See  Figure 3-43 for the upgrade interface where you can upgrade the WEB, gateway service, 
kernel and firmware to new versions. Select the upgrade package “*.pack” via 

Browse…

 and click 

Update

. Wait for a while and the gateway will finish the upgrade automatically. Note that clicking 

Reset

 can only delete the selected update file but not cancel the operation of 

Update

. 

SMG Series Analog Gateway User Manual (Version 1.0)           

                                     Page 40 

Summary of Contents for SMG1008























































Reviews:

No comments