Synthes The Titanium Femoral Nail System Technique Manual Download Page 77

Page: 77 / 78

311.689

Cannulated Tap for 6.5 mm and
7.3 mm Cannulated Screws

314.04

Solid Hexagonal Screwdriver Shaft for removal
of 7.3 mm Cannulated Screws

314.23

Cannulated Hexagonal Screwdriver Shaft

319.46

2.8 mm Cleaning Stylet

408.830-

7.3 mm Titanium Cannulated Screws,

408.865,

16 mm thread, 30–65 mm, 130 mm

408.930

314.17

Large Hexagonal Screwdriver with universal
joint

321.15

Socket Wrench with universal joint, 11 mm width
across ﬂats

511.20

Oscillating Drill Attachment for use with Small
Air Drill or ComPact Air Drive II [511.701]

Instruments

351.05

Tissue Protector

351.15

Flexible Shaft Handle, quick coupling,
cannulated

351.717

Depth Gauge

351.719

Depth Gauge Extension Tube

351.782

Holding Forceps

351.783

Removal Tool

351.92

6.0 mm Hand Reamer, 450 mm

351.93

7.0 mm Hand Reamer, 450 mm

351.94

8.0 mm Hand Reamer, 450 mm

352.040

5.0 mm Flexible Shaft, 2 ea.

352.041

3.6 mm Cleaning Brush

352.050

7.0 mm Reduction Head, straight

352.055

7.0 mm Reduction Head, angled

355.01

Medullary Tube

393.10

Universal Chuck with T-Handle

Medullary Reamer Heads

352.085

8.5 mm

352.090

9.0 mm

352.095

9.5 mm

352.100

10.0 mm

352.105

10.5 mm

352.110

11.0 mm

352.115

11.5 mm

352.120

12.0 mm

352.125

12.5 mm

352.130

13.0 mm

352.135

13.5 mm

352.140

14.0 mm

352.145

14.5 mm

352.150

15.0 mm

352.155

15.5 mm

352.160

16.0 mm

352.165

16.5 mm

352.170

17.0 mm

352.175

17.5 mm

352.180

18.0 mm

352.185

18.5 mm

352.190

19.0 mm

Also Available

105.954

H/M/T Small Battery Drive Set

351.706S

2.5 mm Reaming Rod with ball tip, 950 mm, sterile

351.707S

2.5 mm Reaming Rod with ball tip and extension, 950 mm, sterile

355.399

Extraction Hook for Titanium Cannulated Nails

◊

Flexible Reamer Set for IM Nails [150.060]

Also available for Miss-A-Nail locking with
6.5 mm Titanium Cancellous Screws

357.94

5.6 mm/3.2 mm Wire Sleeve, 150 mm,
for use with Miss-A-Nail Jig

Also available for Miss-A-Nail locking with
7.3 mm Titanium Cannulated Screws

MISS-A-NAIL

◊

Items available nonsterile or sterile-packed. Add “S” to catalog number to order sterile product.

690.382

Graphic Case, for Flexible Reamer Set

Summary of Contents for The Titanium Femoral Nail System















































































Search results

Summary of Contents for The Titanium Femoral Nail System

Reviews:

Related manuals for The Titanium Femoral Nail System

Brands by name

Popular brands

Synthes The Titanium Femoral Nail System, Technique Manual

Search results

Summary of Contents for The Titanium Femoral Nail System

Reviews:

Related manuals for The Titanium Femoral Nail System

Brands by name

Popular brands