Synrad Novanta OEM ti Series, User Manual

Page: 104 / 106

APPENDIX PAGE | 2
Technical Reference:
General Specifications: Physical Specifications.
ti100p pulsed laser addenda
ti100p that differs from standard ti-Series lasers: Otherwise refer to the ti-Series Operator’s Manual
located on our web site for installation, integration, and operation information.
• The ti100p is currently available in 9.3 μ m and 10.6 μ m wavelengths.
• The ti100p is a pulsed laser; therefore, the maximum PWM duty cycle is limited to 50%.
• Maximum Pulse Repetition Frequency (PRF) is 100 kHz.
• Pulse width is limited to 500 μ s maximum.
The ti100p is shipped with a beam expander mounted and aligned to the faceplate. Available expansion
ratios are 3X, 4X, and 5X. Beam diameter (1/e2) at the beam expander output is shown in the table
below:
Important Note: Do not apply a tickle signal. Do not use a UC-2000 Controller or other PWM
signal source that generates a tickle signal. Applying a tickle signal to the ti100p may interfere
with its pulsing performance.
The minimum power supply requirement for the ti100p laser is:
Voltage: 48 V ± 1.0 VDC
Current: 35 A (50 A peak for < 500
μ
s)