stand-alone
operation
SYNRAD FH Series Flyer Operator’s Manual Version 3.4
9
1
WinMark Pro/FH Flyer interface
There is no standard convention for naming TrueType fonts. You must carefully verify that
the fonts used in your WinMark Pro .mkh mark files are the same as the fonts loaded into
the Flyer Fonts folder on the network share.
Configuring a network share
When operating FH Flyer in stand-alone mode, you can store mark files, data files, and font files in the
Flyer Filestore or you can store them in a share folder on a computer connected to your Ethernet network.
Follow the steps described in the sections below to configure WinMark Pro and Flyer to look for files or
fonts on a network share.
Create a share folder
1
On your network computer, select an existing folder or create a new folder as the share folder.
2
Right-click the folder and choose Properties from the contextual menu.
3
In the folder Properties dialog, click the Sharing tab.
4
Click the Share this folder option button.
5 Click
OK to accept this action and close the folder Properties dialog.
Note: In Window’s Explorer, the folder icon changes to indicate the folder is now a shared folder.
Setup Flyer’s network share settings
1
Power up Flyer and allow it to boot-up.
2
Open WinMark Pro and go to the “Device” tab under Tools / General Settings… .
3
Scroll down the “Device” tab and locate the Share Name property.
Enter the name of the share folder you created in the previous section.
4
For the Share Server property, enter the IP address of the computer on which the share folder re-
sides.
5
Enter a Share Username. This must be a legitimate user from the list of users with access to the
share folder on the network.
6
Enter a Share Password. This is the password used with the Share Username to gain access to the
share folder on the network.
7
If the share folder should have “read-only” access, set the Share ReadOnly property to Yes.
8 Click
Apply to save settings and then click OK to close the General Settings dialog.
When you re-open the General Settings dialog, the Network Share Available property (Yes or No) indicates
whether Flyer is able to access the desired network share folder.
Summary of Contents for FH FLYER
Page 146: ...SYNRAD FH Series Flyer Operator s Manual Version 3 4 116 This page intentionally left blank...
Page 206: ...SYNRAD FH Series Flyer Operator s Manual Version 3 4 176 This page intentionally left blank...
Page 224: ...222 SYNRAD FH Series Flyer Operator s Manual Version 3 4 This page intentionally left blank...
