Synrad FH FLYER, Operator'S Manual

Page: 34 / 250

getting started
3 4
SYNRAD FH Series Flyer Operator’s Manual Version 3.4
Unpacking
The Unpacking section includes subsections:

Incoming inspection

Packaging guidelines
Incoming inspection
Upon arrival, inspect all shipping containers for signs of damage. If you discover shipping damage, docu-
ment the damage (photographically if possible), and then immediately notify the shipping carrier and
SYNRAD, Inc. The shipping carrier is responsible for any damage that occurs during transportation from
SYNRAD, Inc. to your receiving dock.
Packaging guidelines

To prevent equipment damage or loss of small components, use care when removing packaging
materials.

After unpacking, review the Inventory section and verify that all components are on hand.

Save all shipping containers and packaging materials, including covers and plugs. Use these special-
ized packing materials when shipping the marking head to another location.

When packaging a marking head for shipment, be sure to remove all accessory items not originally
attached to the head.

Place the red plastic expander cover over the input beam expander and place the red plastic lens cover
over the focusing lens. These covers help prevent damage to expander and focusing optics.

When shipping the head without a focusing lens attached, remove the anodized metal disc from inside
the red plastic lens cover and fasten it over the lens opening using the three lens mounting screws.
This keeps the optical scanner mirrors from being damaged.

Refer to the Packaging instructions drawings in the Technical Reference chapter for details on packag-
ing the Flyer head using SYNRAD-supplied shipping materials.