25
10. BEFORE CALLING FOR REPAIRS
SYMPTOM
The Macintosh
computer hangs up
at startup.
The PC card cannot
be mounted (no icon
is displayed).
CAUSE
Non-standard SCSI
cable is used.
The SCSI cable is too
long.
The PCM-CR-S2I
drive and other SCSI
devices are not
properly connected.
The terminator is not
activated.
The same SCSI ID is
assigned to more than
one SCSI device.
The PCM-CR-S2I
drive has the same
SCSI ID as another
SCSI device.
The SCSI cables are
not properly
connected.
The terminator is not
activated.
Mac-PC Manager is
not installed.
Mac-PC Manager is in
contention with other
control panels or
extended functions.
The card is not
properly inserted.
CORRECTIVE MEASURE
Use a standard SCSI cable.
Use a standard SCSI cable(6m or
shorter).
Change the cableconnections.
Activate terminator.
Turn off the power to the SCSI device
then change the SCSI ID.
Turn off the power to the SCSI device
then change its SCSI ID.
Change the cable connections.
Activate terminator.
Install Mac-PC Manager in the
system folder.
Delete the suspect control panels or
extended functions, or change their
names and the startup activation
order.
Insert the card properly.
